Rubber Types

Material Property Application
Natural Rubber(NR) High elasticity, high tensile strength, excellent tear resistance and electrical insulation, good wear
resistance and drought resistance, good processability, easy bonding of other materials, superior to
synthetic rubber in overall performance. The disadvantages are poor resistance to oxygen and ozone, aging
and deterioration, poor oil and solvent resistance, low acid-base corrosion resistance and heat resistance.
Operating temperature range: about -60 °C ~ +80 °C.
Production of tires, rubber shoes, hoses, tapes, wire & cable insulation and sheathing, and other
general purpose products. Particularly suitable for torsional vibration dampers, engine dampers, machine
supports, rubber-metal suspension elements, diaphragms, moulded products etc.
Styrene Butadiene Rubber(SBR) Its performance is close to that of natural rubber, and its output is largest in common synthetic rubber
currently. The abrasion resistance, aging resistance, and heat resistance exceed that of natural rubber, and
its texture is evener than that of natural rubber. The disadvantages are low elasticity, poor resistance to
flexion and tearing, poor processability, especially poor self-adhesion and low raw rubber strength.
Operating temperature range: about -50 °C ~ +100 °C.
Mainly replacing natural rubber and making rubber sheet, rubber hose, rubber shoes and other general
products.
Neoprene(CR) It has excellent resistance to oxygen, ozone resistance, non-flammable, self-extinguishing after ignition,
oil and solvent resistance, acid and alkali resistance, aging resistance, good air tightness etc. Its
physical and mechanical properties are also better than that of natural rubber, so it can be used as a
general purpose rubber or as a specialty rubber. The disadvantages are poor cold resistance, large specific
gravity, high relative cost, poor electrical insulating properties, stickiness during processing, scorching,
and easy adhesion. In addition, the raw rubber has poor stability and is not easy to preserve. Operating
temperature range: about -45 °C ~ +100 °C.
It is mainly used for making cable jackets, various protective sleeves and covers required high resistance
to ozone and aging. Making oil and chemical resistant hoses, tapes and chemical linings. Also making
fire-resistant underground mining rubber products, various moulded products, seals, pads, adhesives etc.
Butyl(IIR) The most prominent feature is good air tightness, ozone resistance, good aging resistance, high heat
resistance, long-term working temperature below 130 °C. It’s able to resist inorganic strong acids (such as
sulfuric acid, nitric acid etc) and general organic solvents, and has good vibration absorption and damping.
Electrical insulation is also very good. The disadvantages are poor elasticity, poor processability, slow
vulcanization, poor adhesion and oil resistance. Operating temperature range: about -40 °C ~ +120 °C.
Mainly used for making inner tubes, water tires, balloons, wire and cable insulation, chemical equipment
lining and shockproof products, heat resistant transport belts, heat and  aging resistant tape
products.
Nitrile(NBR) The resistance to gasoline and aliphatic hydrocarbon oils is excellent, second only to polysulfide rubbers,
acrylates and viton, and superior to other general purpose rubbers. Heat resistance, airtightness, wear
resistance and water resistance are all good, and strong adhesion. The disadvantages are poor cold
resistance and ozone resistance, low strength and elasticity, poor acid resistance, electrical insulation
and polar solvent resistance. Operating temperature range: about -30 °C ~ +100 °C. 
Mainly used for making various oil-resistant products, such as hoses, sealed products.
Ethylene Propylene Rubber(EPDM) Ozone resistance, UV resistance, weather resistance and aging resistance, ranking first in general rubber.
Electrical insulation, chemical resistance, impact elasticity, acid and alkali resistance, small specific
gravity, high filling compatibility. Heat resistance up to 150 °C, polar solvents (ketones, esters etc.),
but not resistant to aliphatic and aromatic hydrocarbon. The physical and mechanical properties slightly
inferior to that of natural rubber and better than that of SBR. The disadvantages are poor self-adhesion and
mutual viscosity, and difficult to bond. Operating temperature range: about -50 °C ~ +150 °C.
Mainly used to make lining of chemical equipment, wire and cable sheathing, steam hose, heat-resistant
conveyor belt, automotive rubber products and other industrial products.
Silicone(VMQ) Both high temperature (maximum 300 °C) and low temperature (minimum -100 °C), it is the best cold and high
temperature resistant rubber currently. It also has excellent electrical insulation, high stability to
thermal oxidation and ozone. Disadvantages are lower mechanical strength, poor oil resistance, solvent
resistance, acid and alkali resistance, and  expensive. Operating temperature: -60 °C ~ +200 °C. 
It is mainly used for making high and low temperature resistant products (rubber pipes, seals etc.), high
temperature resistant wire and cable insulation. It is also used in food and medical industries because it
is non-toxic and tasteless.
Viton(FKM/FPM) Acid and alkali resistantance, oil resistance are the best in oil resistant rubber. High temperature
resistance up to 300°C, it also has good resistance to radiation and high vacuum resistance. Electrical
insulation, mechanical properties, chemical resistance, ozone resistance, atmospheric aging resistance are
all excellent. Disadvantages are poor processing, expensive and poor cold resistance, low elasticity and air
permeability. Operating temperature range: -20 °C ~ +200 °C. 
It is mainly used in the defense industry to making sealing materials and hoses for aircrafts and rockets
required vacuum-resistant, high-temperature, chemical-resistant,  or other parts .
Exit mobile version